An onion peeling machine is a piece of equipment that is often used when dealing with onions, but how does an onion peeling machine work? Now let’s learn this together.
The machine is powered by compressed air and adopts a chain conveying bin type peeling structure. The onion enters the peeling bin through the chain transmission. When passing through the peeling bin, the onion and skin are separated by compressed air flow, and the peeling is carried out continuously during the process. During the peeling process, the onions are not peeled by hardness friction at all, ensuring the integrity, freshness and pollution-free of processed products. At the same time, it saves electricity and energy, has high output and high efficiency, and is easy to clean.
Use and operation:
The power supply of this machine is 380V. Before starting the machine, adjust the air pressure of the air compressor to 0.8mpa. Check whether there is any debris on the chain conveyor belt of the air off-line. After the power is turned on, press the “transmission start” button to see the chain conveyor belt. Whether the running direction is consistent with the direction marked on the machine, if the direction is not consistent, the machine needs to be adjusted to match the marked direction before it can be used.
Job start sequence:
- Chain drive button to start the chain peeler
- After the chain is running normally, open the ventilation valve, put the onion into the hopper, and the onion enters the peeling studio through the walking chain conveyor belt. The onion is separated by compressed air during the walking process, and the onion falls off by itself through the chain conveyor. Enter the receiving box.
Precautions:
- When the machine is running, if any abnormality is found, stop the machine immediately for inspection, and it is strictly forbidden to solve the fault while the machine is running.
- When the feeding port is blocked, it is strictly forbidden to use hands or sticks to help feed.
- It is strictly forbidden to mix ironware, stones and other sundries into the materials to be peeled.
- Reasonable allocation of power, it is strictly forbidden to increase the power and increase the spindle speed at will.
- After the new machine has been used for a period of time, the driving and transmission chains will loosen. When the loosening occurs, you can adjust the chain adjustment screw on the equipment.
- Check and clean the components of each part of the machine twice a week, clean up the sundries on the chain once a day, add butter to the bearing once a month, and add gear oil to the reducer once a month. Frequently check the looseness of the V-belt and the screws of each part and eliminate or replace it in time.